Power Wrms/channel/8Ω |
120 W |
Power Wrms/channel/4Ω |
200 W |
Impulse Power |
200 W |
Power supply (VA) |
670 |
Total of capacitors (µF) |
62 000 |
Inputs |
4 + 1 monitor |
Input Impedance (kΩ) |
220 |
Sensibility (mV) |
100 |
Rising Time (µs) |
2,5 |
Signal/Noise Ratio (dBA) |
100 dB |
Bandwidth |
5 Hz – 100 kHz |
Weight (kg) |
12 |
Dimensions (mm) |
440x90x280mm |
– Symmetrical Output stages with discrete components
– Double pair of MOS-FET transistors on each channel
– Specific low consumption supplies (5VA) for analog circuits and display.
– Capacitors: 8x6800uF low ESR high quality designed specifically for ATOLL.
– 2 volume attenuators: 1 per channel
– Analog stages with Mundorf MKP condensators in an armoured shell
– Complete settings (from the front panel or with the remote control) of the balance and volume
– Direct access to each input from the front panel or with the remote control
Audio converter: AKM – AK4490
PCM from 16 bits to 32bits up to 384 kHz on USB-B input (asynchronous).
DSD : DSD64 & DSD128.
USB Interface: XMOS with the specific program designed for ATOLL
Connectings:
5 audio stereo Inputs (RCA):
– CD
– TUNER
– TAPE (IN+OUT)
– AUX ( or optional board)
– DVD
1 trigger 12V Output
1 By-pass Input (uses as power amplifier)
Double pair of Pre-out by bi-amp.
Headphones jack
.