Home > Pick-up>Creek OBH-15MK2
http://www.acustik.ro/698-thickbox_default/creek-obh-15mk2.jpg

Creek OBH-15MK2

   Pre-amplificator phono Creek OBH-15MK2. The OBH-15 Mk2 is small and very stylish. Designed to complement the Creek full sized range, it has an impressive solid aluminium front panel with either a silver or black finish. Its extruded black aluminum case is fitted with turned aluminium disc feet and sound absorbing Bumpons.

More details

Specificatii tehnice pentru CREEK OBH-15MK2


THD+NOISE AT 2VRMS OUTPUT: MM (40dB gain) @ 1kHz = 0.002%
MM (40dB gain) @ 10kHz = 0.003%
MM (50dB gain) @ 1kHz = 0.007%
MM (50dB gain) @ 10kHz = 0.007%
MC (60dB gain) @ 1kHz = 0.005%
MC (60dB gain) @ 10kHz = 0.005%
MC (70dB gain) @ 1kHz = 0.011%
MC (70dB gain) @ 10kHz = 0.012%
CHANNEL SEPARATION MM (all gains) 1kHz = >70dB
MC (all gains) 1kHz = >70dB
FREQUENCY RESPONSE 0.5Hz – 100kHz (+/-0.5dB)
SNR MM (40/50dB gain) = 76/66dB
MC (60/70dB gain) = 77/70dB
OVERLOAD MARGIN MM (all gains)
21.7dB@50Hz – 21.7dB@1kHz – 21.7dB@20kHzMC (all gains)
20.7dB@50Hz – 20.7dB@1kHz – 20.7dB@20kHz
OUTPUT LEVEL 6.1V rms Maximum
OUTPUT IMPEDANCE 100 Ohms
GAIN MM = 40dB/50dB
MC = 60dB/70dB/80dB
MATCHING MM = 100pF or 200pF plus 47k Ohms
MC = 100pF or 1100pF plus 100 Ohms or 510 Ohms
SIZE 95 x 60 x 180mm WxHxD
WEIGHT 1.0 kgs inc OBH-Uni power adapter
POWER CONSUMPTION 3 Watts
MAINS VOLTAGES 100V to 250V AC 50/60Hz
MAINS CONNECTION A clip-on plug is supplied for UK, North America and Europe
FINISH COLOURS Black or Silver Front Panel


The OBH-Uni is a multi-region, 24V, 0.5A power supply adaptor.

Creek originally developed this power adaptor to simplify the requirements for selling OBH products in all countries. However, extensive listening tests and comparisons proved that this high efficiency regulated power adaptor can also extract the best performance from all of Creek’s OBH products. This includes the latest OBH-15mk2 Phono Pre-amp, which has high-gain and is therefore more demanding of its power supply’s purity.

It is supplied with three different snap-on power-plugs suitable for Europe, UK and USA. The snap-on head on the latest version of OBH-Uni uses a 2 pin, figure 8 connector, so it’s possible to use a 2 pin figure 8 extension power cord, with alternative mains plugs on the end. It provides a stable output from any input mains voltage range from 100 – 240V.

Strict international regulations make it unacceptable to use conventional linear power adapters because, if they are left permanently switched-on, their standby power will definitely exceed the 0.5W limit. The latest OBH-Uni draws less than 0.5W when idle, or plugged-in but not used. It is also silent in operation, from zero to maximum current consumption.